Texo Application has created robots that they call for satellites; with these you can feed in storage pallets into a satellite storage. Satellite storages consist of channels in height (e.g.3 to 8 pieces) and width (e.g.3 to 100 pieces). Channels can be different long (e.g. 5 to 200 pallets). At deposit of a storage pallet the truck insert the satellite in a channel and then the pallet, the pallet is driven into the channel until it reaches another pallet or the other end.

This thesis was conducted at AB Fredr Wagner in Ösmo in Nynäshamn, Sweden.AB Fredr Wagner provides solutions for the graphic industry and has been asked by acustomer to develop a product that can simplify handling of EUR-pallets, namely amechanical arrangement, further called pallet exchanger that can switch from anempty pallet to a fully loaded one using only hand force.The goal with the thesis was to create design documents for a pallet exchanger, andalso from those documents to manufacture a prototype for testing and evaluation.A field trip was made to the customer, IKAB mailing in Huddinge, where the palletexchanger is thought to be placed. The purpose of this field trip was to get an insightinto the current work condition and need of change, as well as to gather informationregarding the requirements when it comes to size and robustness of the palletexchanger. Existing equipment on the market that can perform similar tasks werestudied in order to find an optimal solution for the actual pallet exchanger.After the field trip and gathering of information the concept generating phase began.The method used for generating concepts was brainstorming. To decide on whichconcept to use, a concept selection matrix was created. The selection criteriaincluded in the matrix came from the requirements for the pallet exchanger.

Det senaste decenniet har Sydafrika genomgått enorma förändringar. Landet har lämnat det minoritetsstyrda apartheidsystemet och blivit demokratiskt. Att förändringar får olika följder är givetvis självklart, kanske relaterar de flesta till den kraftiga ökningen av våldsbrott. Det finns dock även en annan typ av brott som ofta kommit i skymundan i den nuvarande debatten det är s.k. White-Collar Crime, vilket jag har valt att undersöka i min uppsats.

One of today problem at IVT industries would be assembly of insulation on water cisterns. The element of assembly insulation on the cistern gets too elevated; hence one has to climb onto the stand the cistern is assembly on. This will increase the risk of work related injuries when there is a risk of falling down. It?s also rather strenuous on shoulders due to work with your arms high above your head.

Simplicity, intimacy, freedom and one single threadcharacterize the knitting technique.In my project, I have studied ways of creating three-dimensional shape and structure using single threads and various knitting techniques. I applied my ideas in a collaboration with the singer Sofia Karlsson. The focus has been to design a portable object that can be used in pictures for the cover and promotion of her upcoming album.The material I studied, processed and used in creating the three-part object was linen. In the center stands a collar, that changes expression depending on how it is worn and which side is turned towards the outside. The collar interacts with a cylinder for her hands and a hairnet.

Ett arbete inom produktutveckling har utförts på uppdrag av Goodtech Solution AB i Karlstad. Den produkt som utvecklats är en prototyp av en robotcell. Robotcellens uppgift beskrivs som automatisk pallkragsmontering på en lina. Den här rapporten omfattar förbättringsarbetet för Ytterkragen och dess drift för vertikal rörelse och höjdpositionering. Syftet är att rapporten för detta arbete ska ligga som grund för prototypens förbättringsarbeten innan den släpps ut påmarknaden.Monteringen sker på en lina med rullband där emballaget monteras ihop i robotcellen innan det skickas vidare för nästa moment.

The purpose of my task was to map the pallet flows at Findus and put together as well as analyze the problems. My work has also included finding out what alternatives there are to the present pallet exchange system and suggest measures to reduce the problems.The problems can be divided into poor quality and hygiene issues. The poor quality, for instance poor strength is due to arbitrary judgements and the fact that there are companies that make a system of manufacturing forged pallets of an inferior quality compared to the EUR-pallets. These pallets are marked with stamps more or less similar to the EUR-mark and taken into the exchange system. Of course there are rules how to judge a pallet but these rules are many and sometimes indistinct and there are a lot of marks to keep track of.The most dangerous part is when the pallets lack the prescribed carrying capacity.

The work presented in this report is written at IEIs department on Linköping Institute of Technology. The report aims to increase the assembly efficiency at Wigells AB. The report shall be used as a guide for the implementation of changes at other workstations in the company. Together with Träcentrum in Nässjö, Wigells AB has identified the needs of this study and contacted IEI at Linköping Institute of Technology.In order to implement an efficient assembly line at the company, studies on lean production have been made. This theory has been studied and together with our own views and findings at the company we have analyzed the assembly area.Wigells is a small company that manufactures wood furniture.

If Sweden want to be able to compete internationally with its production capacity,it is important to work actively with production development and production ofresource-and time-efficient. This report is a bachelor thesis of 15 hp conducted atthe University of Halmstad. Using the principles of continuous improvement andLean Production, the author developed a concept for HAGS Aneby AB to changeto the customer order driven assembly of spring toys.First of all, the theories of Lean Production, logistics and ergonomics are used tobuild and present a theoretical framework for further examination. Then, toachieve the target, the current assembly process is analyzed to develop some firstconceptual ideas for improvement. In order to develop the best advice, theconcepts are evaluated against the company?s requirementsThe developed action plan gives recommendations on how the company shouldrestructure their assembly process and the organization of the related departmentin order to produce spring toys in a more time efficient and lean way.

Work gets more seamless and the demand on workers increases because of changes in the labour market. Studies show benefits for workers and companies if the employee achieves a balance between work and family, a way to facilitate it is family-friendly policies. A study done by Unionen shows that three out of four white collar workers choose to vobba (working and caring for a sick child), which blurs the boundaries between work and family. Research on flexibility, organisational culture and gender structures shows how these aspects affect the balance between work and family. This is a study where seven white collar workers (three men) that vobbar and two managers (one man) were interviewed.

Volvo Hauler & Loader Division in Arvika produces wheel loaders which they deliverthroughout the world. The factory which is situated in Arvika is the largest wheel loader plant in the whole world, with its 1 100 employees. The different models stretch from L60E all theway up to the brand new L350F, with a loader capacity from six tons up to a staggering 35.The assembly of the different models are divided into three different assembly lines, Small(L60-L90), Medium (L110-L120) and Large (L150-L220). The assembly of Heavy (L350)has just been started with an upcoming pre series.This examination paper gives recommendations of improvements and necessary modifications to rationalize the pre-assembly of boom units. Three different scenarios are presented in the paper.

This paper presents the result of a master thesis project at 30 Hp, master of industrial engineering at Luleå University of Technology. The project was performed during 20 weeks, spring 2014, in collaboration with ABB Control Products in Västerås. The aim of the project was to evaluate two half-automated assembly lines for a new generation of contactors, the NAFC assembly lines (New AF Conductor). The aim and purpose of the project was achieved by answering the following questions:? How are the ergonomic working conditions at the NAFC assembly lines during spring 2014?? Which areas at NAFC assembly lines can be improved for the work environment?? How can the ergonomic work conditions improve at the NAFC assembly lines?Literature reviews were performed from earlier research papers and articles of the ergonomic, musculoskeletal and work environment subject, from where a number of chosen methods and tools were used to perform the ergonomic evaluation.

At ABB LV Motors in Västerås the shaft is assembled into the rotor with a shrink fit. After athorough investigation of the assembly method, several factors that make the insertion of theshaft more difficult has been discovered. Some affect the assembly directly while others onlyhave an indirect influence. The investigation has shown that the radial play between the shaftsouter radius and the rotors inner radius might be too small which could lead to anunsuccessful assembly. For the larger rotors, the condition is the opposite, and the rotor mightmove compared to the shaft direct after the assembly when the rotor still is warm.

This report analyzes disposable packaging and returnable packaging with the methods life cycle analysis and life cycle costs analysis. These two different packaging are analyzed through the company Clas Ohlson?s packaging-flow. To get a picture of how the flow works, a visit at the company and email contact have been done with Clas Ohlson to get relevant informationToday Clas Ohlson has a big flow of articles to the stores without larger variations in the demand, with the exception of autumn, which is when customers start shopping for Christmas. Clas Ohlson?s articles are placed on a pallet and are wrapped into plastic-film for protection and to make sure that nothing will be stolen.

Scania is among the leading companies in the heavy vehicle industry. Scania also assemble engines for their trucks and buses, as well as to external marine and industrial applications. Wrongly assembled parts leads to quality problems, which makes it important to secure that the assembly is correct. To do this Design For Assembly (DFA) is used to describe how parts should become easier to assemble. Scania?s production unit for engine assembly has had a working method for DFA in the shape of a checklist, which is not used.